For obstetric or gynecological procedures requiring additional forearm coverage, evaluate sterile, powder-free, long-cuff latex surgical gloves by overall length, gown overlap, fit, grip, and documentation for the exact model.
When should buyers consider long-cuff obstetrics surgical gloves?
Long-cuff obstetrics surgical gloves are worth evaluating when a clinical team needs additional forearm coverage or greater overlap between the glove and surgical gown sleeve.
The extended design provides more coverage above the hand for obstetric, gynecological, and other procedures with that requirement. When requesting samples, tell the supplier the intended application, required overall length, usual glove sizes, and whether the team plans to double glove.
Natural rubber latex offers softness, elasticity, and a close fit. During evaluation, users should also handle familiar instruments to assess fingertip fit, palm tension, and freedom of finger movement.
Does 430 mm refer to cuff length or overall glove length?
For Medispo® Obstetrics Latex Surgical Gloves, ≥430 mm refers to the minimum overall glove length, measured from the fingertip to the cuff edge.
If a purchasing specification states “cuff length” or “forearm coverage,” confirm the measurement definition before comparing products. The coverage achieved by a glove also depends on the wearer’s hand dimensions, selected size, and gown sleeve.
During a wear trial, use the surgical gown normally worn by the team. Ask users to flex their wrists, bend their elbows, and reach for instruments. Observe whether the cuff shifts or rolls and whether the required overlap with the gown is maintained.
What specifications does the Medispo® obstetrics latex glove offer?
Manufactured by HBM Protections, Medispo® Obstetrics Latex Surgical Gloves are available in the MOSG range. They are sterile, powder-free natural rubber latex gloves with a hand-specific design, beaded cuffs, and a microtextured surface.
| Comparison point | Medispo® MOSG specification |
|---|---|
| Material | Natural rubber latex |
| Minimum overall glove length | ≥430 mm |
| Size range | 5.5–9.0 |
| Nominal fingertip thickness | 0.22 mm |
| Nominal palm thickness | 0.21 mm |
| Nominal cuff thickness | 0.16 mm |
| Cuff design | Beaded cuff |
| Surface | Microtextured |
| Sterilization method | E-Beam |
| Powder status | Powder-free |
| AQL | 0.65 |
| Shelf life | Three years |
| Packaging | One pair per pouch, 50 pairs per box, and 200 or 400 pairs per shipping carton |
Buyers can find size-specific item codes in the Medispo® surgical glove catalog. Include the proposed model and sizes in your inquiry so the supplier can confirm packaging, sample availability, and supply arrangements.
What should a long-cuff glove wear trial assess?
Evaluate the gloves with the gowns and instruments the clinical team actually uses.
A structured wear trial helps buyers compare the extended cuff alongside fit and handling.
| Trial area | What to observe |
|---|---|
| Fingertip fit | Excess material at the fingertips and its effect on handling small instruments |
| Palm fit | Tightness when making a fist and material bunching across the palm |
| Instrument handling | Control when gripping, rotating, and releasing familiar instruments |
| Cuff stability | Movement or rolling as the wrist and arm change position |
| Gown compatibility | Whether the required cuff overlap remains during movement |
| Double gloving | Finger movement, grip, and cuff position with the intended inner and outer gloves worn together |
Have the same wearer perform similar movements with each sample. Record specific differences, such as less fingertip room or more stable cuff positioning after elbow movement. These observations make it easier to compare models and select sizes.
What do 100% Air Inflation Testing and AQL tell buyers?
100% Air Inflation Testing checks individual gloves, while AQL is used in sampling-based lot acceptance.
HBM Protections uses 100% Air Inflation Testing for its surgical gloves. Each glove is 100% air inflated and undergoes 7-stage quality inspections before delivery. The Medispo® MOSG specification lists an AQL of 0.65.
If a tender specifies AQL1.5, review the test item, sampling plan, and acceptance criteria alongside the stated AQL. This helps determine whether the submitted documentation meets the purchasing requirement.
The MOSG catalog lists EN455 and ASTM D3577 among its applicable standards. Buyers can request the relevant model-specific documentation and check the sample identification, test method, and results. If a tender names an additional test, share the requirement with the team to confirm which supporting documents are available.
Which documents should buyers check for their destination market?
Identify the exact model first, then review the product, regulatory, and labeling documents relevant to the destination market.
| Purchasing requirement | Documents and details to review |
|---|---|
| European Union | EU Declaration of Conformity, applicable MDR certificate and scope, labeling, and instructions for use |
| United States | Applicable FDA 510(k) number and supporting documents, with confirmation of how the quoted model corresponds to the relevant device record |
| Supplier qualification | Validity, manufacturing address, and scope of ISO 13485 and other relevant management system certificates |
| Product evaluation | Product specification sheet, EN455 reports, and other test reports required by the purchasing specification |
| Incoming inspection | Model, sizes, pack quantity, lot number, expiry date, and packaging integrity |
Public certificates and document information are available on the HBM Protections certificates and quality documentation page. For tender submissions, registration, or import review, request documents corresponding to the selected model and destination market.
What surgical gloves and sourcing support does HBM Protections provide?
HBM Protections is a medical protective products manufacturer based in Guilin, China. It manufactures Medispo® surgical gloves and provides branded supply and OEM/ODM services.
The Medispo® range includes natural rubber latex, polyisoprene (PI), and neoprene surgical gloves, with standard, sensitive, orthopaedic, obstetrics, and double-gloving options. Buyers can compare the Medispo® surgical glove range before shortlisting samples.
HBM Protections operates 20 surgical glove production lines with annual capacity exceeding 500 million pairs across its surgical glove range. Its quality controls include individual air inflation testing and seven-stage inspections. The team can provide specifications, packaging information, and available test and regulatory documentation relevant to the selected product and market.
To evaluate Medispo® MOSG obstetrics latex surgical gloves, contact HBM Protections with your destination market, required sizes, minimum length, estimated quantity, and branding requirements to discuss samples and supply options.


